SevereAffected: 2003-201370,000–130,000 miles

Audi A3 8P 2.0 TDI 140bhp PD — Starter Motor Solenoid / Brush Wear

The starter motor wears out internally. This is particularly common on vehicles equipped with Stop/Start systems.

Severity

Severe

DIY Difficulty

Moderate

Est. Cost

£150–£350

OBD Codes

None

Symptoms

A single loud 'click' when turning the key, but engine doesn't crank
Engine cranks very slowly despite a fully charged battery
Whirring or grinding noise after the engine starts

Root Cause

The carbon brushes inside the motor wear down to the copper wiring, or the contacts inside the solenoid burn out from repeated arcing.

How To Fix

Confirm battery voltage is strong under load (to rule out a dead battery).
Replace the starter motor unit.
Ensure main earth straps from engine block to chassis are clean and tight.
Cost: £150-350

Estimated Repair Costs

Repair Option	Est. Cost (GBP)
DIY (parts only)	£60–£140
Independent Garage	£150–£350
Main Dealership	£240–£560

Other Faults on This Variant

Flywheel / DMF Shudder

Moderate

2003-201380,000–160,000 miles£700–£1000

Like the Golf Mk5, the A3 2.0 TDI consumes Dual Mass Flywheels. Worn DMFs cause significant vibration and require complete replacement.

High Pressure Fuel Pump Cam Follower Wear

Critical

2003-201320,000–100,000 miles£15–£1500

The same critical cam follower issue as the Golf Mk5 — the HPFP cam follower wears through to the camshaft. A £15 inspection and part replacement prevents a £2,500 camshaft repair.

Porous Cylinder Head (BKD Engine)

Critical

2003-200850,000–120,000 miles£1200–£2000

Early 2.0 TDI 140bhp engines (engine code BKD) suffered from porous cylinder heads, causing coolant to leak directly into the combustion chambers or oil ways.

Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.