Ford Fiesta Mk7 1.0 EcoBoost 100bhp — Electric Window Regulator Cable Failure
The cables inside the electric window regulator mechanism fray and snap, causing the window glass to drop into the door frame.
Severity
MinorDIY Difficulty
Moderate
Est. Cost
£100–£200
OBD Codes
None
Symptoms
- Grinding or crunching noise when operating the window switch
- Window glass drops down into the door and won't come up
- Window sits crooked in the frame
Root Cause
The steel cables run over plastic pulleys. The plastic pulleys degrade and crack, or the cable frays and tangles inside the motor drum.
How To Fix
- Remove the interior door card to access the regulator.
- Tape the window glass 'up' temporarily to secure the vehicle.
- Replace the entire window regulator mechanism (usually supplied without the motor).
- Cost: £100-200
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£80 |
| Independent Garage | £100–£200 |
| Main Dealership | £160–£320 |
Other Faults on This Variant
Timing Chain Stretch and Tensioner Failure
CriticalPre-2016 Ford 1.0 EcoBoost engines suffer from premature timing chain stretch. The plastic tensioner can fail, causing catastrophic engine damage with little warning.
Coolant Loss from Cylinder Head
SevereThe 1.0 EcoBoost has an integrated exhaust manifold cast into the cylinder head. This design causes head gasket stress and coolant loss, sometimes causing overheating.
Thermostat Failure and Overheating Risk
ModerateThe plastic thermostat housing on the 1.0 EcoBoost is prone to cracking. A stuck-open thermostat causes the engine to run cold and burn more fuel; a stuck-closed thermostat causes rapid overheating.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.