Kia Ceed Mk2 1.6 CRDi — Sticking Brake Calipers (Slider Pins Seized)
The floating brake caliper design relies on sliding pins. In the UK climate, salt and water ingress cause these pins to rust and seize solid.
Severity
ModerateDIY Difficulty
Moderate
Est. Cost
£80–£150
OBD Codes
None
Brakes
Typical layout and location for the Brakes assembly.
Symptoms
- Car pulls to one side when driving
- Burning smell coming from one wheel after driving
- One alloy wheel feels extremely hot to the touch
- Severe, uneven brake pad wear
Root Cause
The rubber dust boots around the caliper slider pins perish or split. Water and road salt enter the cavity, rusting the steel pin into the aluminum caliper bracket.
How To Fix
- Remove the caliper and attempt to extract the seized pin using heat and vice grips.
- Clean the bore thoroughly with a wire brush.
- Fit new slider pins with high-temperature silicone grease.
- If the pin snaps, a new caliper carrier is required.
- Cost: £80-150
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £32–£60 |
| Independent Garage | £80–£150 |
| Main Dealership | £128–£240 |
Other Faults on This Variant
Air Conditioning Condenser Leak (Stone Damage)
MinorThe air conditioning condenser is mounted at the very front of the cooling pack, making it highly susceptible to stone damage from the road, leading to refrigerant loss.
Front Anti-Roll Bar Drop Link Wear
MinorThe front anti-roll bar drop links wear out on heavily potholed UK roads, causing an annoying knocking sound at low speeds.
Alternator / Smart Charge System Failure
SevereModern vehicles use smart charging systems to reduce engine load, but the complex regulators on the alternators frequently fail.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.