Peugeot 207 1.6 HDi 90bhp — Electric Window Regulator Cable Failure
The cables inside the electric window regulator mechanism fray and snap, causing the window glass to drop into the door frame.
Severity
MinorDIY Difficulty
Moderate
Est. Cost
£100–£200
OBD Codes
None
Symptoms
- Grinding or crunching noise when operating the window switch
- Window glass drops down into the door and won't come up
- Window sits crooked in the frame
Root Cause
The steel cables run over plastic pulleys. The plastic pulleys degrade and crack, or the cable frays and tangles inside the motor drum.
How To Fix
- Remove the interior door card to access the regulator.
- Tape the window glass 'up' temporarily to secure the vehicle.
- Replace the entire window regulator mechanism (usually supplied without the motor).
- Cost: £100-200
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£80 |
| Independent Garage | £100–£200 |
| Main Dealership | £160–£320 |
Other Faults on This Variant
Timing Belt Failure (60,000 Mile Interval)
CriticalThe PSA 1.6 HDi engine has a 60,000-mile or 4-year timing belt interval — much shorter than most competitors. Belt failure destroys the engine. Many 207 owners are unaware of this critical maintenance item.
Injector Seal Leak (Chuffing / Black Death)
SevereCopper injector seals fail, allowing exhaust gases and unburnt diesel to escape and coat the top of the engine in a hard black tar affectionately known as 'Black Death'.
Turbo Oil Starvation and Destruction
CriticalThe 1.6 HDi (DV6) engine is infamous for destroying turbos. The cause is almost always oil sludge blocking the tiny gauze filter in the turbo oil feed pipe.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.