Ford Focus Mk3 1.6 TDCi 115bhp — Electric Window Regulator Cable Failure
The cables inside the electric window regulator mechanism fray and snap, causing the window glass to drop into the door frame.
Severity
MinorDIY Difficulty
Moderate
Est. Cost
£100–£200
OBD Codes
None
Symptoms
- Grinding or crunching noise when operating the window switch
- Window glass drops down into the door and won't come up
- Window sits crooked in the frame
Root Cause
The steel cables run over plastic pulleys. The plastic pulleys degrade and crack, or the cable frays and tangles inside the motor drum.
How To Fix
- Remove the interior door card to access the regulator.
- Tape the window glass 'up' temporarily to secure the vehicle.
- Replace the entire window regulator mechanism (usually supplied without the motor).
- Cost: £100-200
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£80 |
| Independent Garage | £100–£200 |
| Main Dealership | £160–£320 |
Other Faults on This Variant
DPF Blockage and Forced Regeneration Failure
ModerateDPF blockage is the most reported issue on the Focus Mk3 1.6 TDCi. City driving prevents regeneration, and the DPF warning light becomes a familiar sight for urban Focus diesel owners.
EGR Valve and Cooler Failure
SevereThe EGR valve and cooler on the Mk3 Focus 1.6 TDCi are known to fail together. EGR cooler failure can cause coolant to enter the intake — a more serious failure than a simple blocked valve.
Turbocharger Failure
SevereThe turbocharger on the Focus Mk3 1.6 TDCi is vulnerable to bearing wear from oil sludge and extended service intervals. Failure typically presents as a sudden loss of power with a loud noise.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.