Land Rover Freelander 2 2.2 SD4 190bhp — Glow Plug Failure / Snapping in Head
Diesel glow plugs burn out over time causing cold starting issues. The major problem is they often snap in the cylinder head when mechanics try to remove them.
Severity
ModerateDIY Difficulty
Moderate
Est. Cost
£100–£300
OBD Codes
P0380Injectors
Typical layout and location for the Injectors assembly.
Symptoms
- Hard starting in cold weather (below 5°C)
- White smoke on cold start for 30 seconds
- Flashing coil light or EML on dash
Root Cause
Carbon buildup around the tip of the glow plug effectively welds it into the cylinder head. Applying too much torque to remove it shears the threaded top off.
How To Fix
- Soak the glow plugs in penetrating oil for several days before attempting removal.
- Only attempt removal with the engine piping hot.
- If a plug snaps, specialist removal tools are required (£150-300 call-out fee).
- Standard replacement cost: £100-200
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£120 |
| Independent Garage | £100–£300 |
| Main Dealership | £160–£480 |
Other Faults on This Variant
Timing Belt Failure and Water Pump Failure
CriticalThe 2.2 SD4 Freelander 2 has a timing belt with a 120,000-mile interval but the water pump is driven by the same belt — and water pump failure destroys the belt. This is a common and expensive failure.
Throttle Body / Anti-Shudder Valve Strip
ModerateThe electronic throttle body (anti-shudder valve) strips its internal plastic gears, causing an unpleasant engine shutdown and a warning light.
Rear Differential Pinion Bearing Failure
CriticalA howling or droning noise from the rear of the car is almost always the rear differential pinion bearing failing. This is incredibly common on all Freelander 2s.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.