Nissan Qashqai J10 1.5 dCi 106bhp — Engine Thermostat Sticking Open
The engine coolant thermostat fails in the 'open' position. The engine never reaches its optimal operating temperature, killing fuel economy.
Severity
MinorDIY Difficulty
Moderate
Est. Cost
£100–£250
OBD Codes
P0128Cooling
Typical layout and location for the Cooling assembly.
Symptoms
- Temperature gauge drops when driving on the motorway
- Heater blows lukewarm air in winter
- MPG drops significantly
- Engine takes a very long time to warm up
Root Cause
The wax element inside the thermostat degrades, or the return spring weakens, preventing the valve from closing off coolant flow to the radiator.
How To Fix
- Scan for P0128 (Coolant Thermostat - Coolant Temp Below Regulating Temp).
- Replace the thermostat housing unit and gasket.
- Bleed the cooling system of air.
- Cost: £100-250
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£100 |
| Independent Garage | £100–£250 |
| Main Dealership | £160–£400 |
Other Faults on This Variant
Timing Chain Failure (K9K Engine)
SevereThe Renault/Nissan K9K 1.5 dCi engine in the Qashqai J10 is known for timing chain wear. Unlike a timing belt, there is no scheduled replacement — but chains stretch and tensioners fail.
DPF Blockage and Sensor Failure
ModerateDPF issues on the J10 Qashqai are common because many are used as school-run and short-trip vehicles — exactly the wrong driving profile for a diesel with a DPF.
Steering Column Clicking / Rack Failure
ModerateA clicking or clunking noise when turning the steering wheel at low speeds is extremely common. It usually stems from the steering column universal joint or the rack itself.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.